1 / 6
Datto S3X1 / SSDX Hard Drive / SSD Carriage Rail
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a hard drive or SSD carriage for the Datto S3X1 mini pc.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 56
- Wydruki
- 1
- Wyświetlenia
- 1523
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
This is a hard drive or SSD carriage for the Datto S3X1 (SSDX) mini pc.
- 0.4mm nozzle
- 0.2mm layer height
- 50% infill
- 4 perimeters
- 5 layers top and bottom
The chassis requires two M2 screws to secure the carriage. You'll also need 4 hard drive screws that have a tapered (countersink) head (this is a requirement as there are very tight tolerances on either side of the hard drive and there is NO space for screw heads.