1 / 5
2 D Cell Flashlight Battery Case for One 18650 (No Wiring, only Screws) — zdjęcie 1
1 / 5

2 D Cell Flashlight Battery Case for One 18650 (No Wiring, only Screws)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Use one 18650 lithium battery for a two cell D size inline battery size.

Ocena
0 / 5
Polubienia
3
Pobrania
38
Wydruki
0
Wyświetlenia
278
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

Made my old EVEREADY flashlight better and more useful. With the addition of 3.7V lithium power I replaced the bulb with a 3-6V LED bulb. Both parts print with 4mm threads for easy assembly. To the long body use a 4mm x 35mm screw. The head is the bulb contact and the end of the screw is the contact for the positive end of the battery. The small insert uses a 4mm x 20mm screw. Since the flashlight spring is a larger diameter, I used a fender washer for the contact. Round head or flathead screws will work fine. A regular washer or a thin piece of metal with a screw hole will work for the bottom contact.

No particular setting. 0.20 layers, 2 or 3 walls, low infill.

Tagi