2 D Cell Flashlight Battery Case for One 18650 (No Wiring, only Screws)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use one 18650 lithium battery for a two cell D size inline battery size.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 38
- Makes
- 0
- Views
- 278
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Made my old EVEREADY flashlight better and more useful. With the addition of 3.7V lithium power I replaced the bulb with a 3-6V LED bulb. Both parts print with 4mm threads for easy assembly. To the long body use a 4mm x 35mm screw. The head is the bulb contact and the end of the screw is the contact for the positive end of the battery. The small insert uses a 4mm x 20mm screw. Since the flashlight spring is a larger diameter, I used a fender washer for the contact. Round head or flathead screws will work fine. A regular washer or a thin piece of metal with a screw hole will work for the bottom contact.
No particular setting. 0.20 layers, 2 or 3 walls, low infill.