1 / 3
COB LED Strip Housing - use for LACK or other enclosures — zdjęcie 1
1 / 3

COB LED Strip Housing - use for LACK or other enclosures

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

COB LED Strip Housing - use for LACK or other enclosures

Ocena
5 / 5
Polubienia
7
Pobrania
50
Wydruki
1
Wyświetlenia
495
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

These are COB LED light strip mounting reflectors I use for my LACK enclosure. I want light on my printer but to minimize what flows outside the enclosure.

There are three types of reflectors to use.

45 degree angle mount which I put on the backsides of my front legs and one at the top middle of my top. These fire light back/in and directly onto the printer where you want it.

45 degree angle mount similar to the above but with a side glare shield. This helps minimize light shooting out the opposite side. I have my enclosure in my office and this helps light not hit me directly from the side which can be glaring at night.

Direct angle mount. I mount this on the ceiling of my enclosure behind my printer firing straight down.

This does a great job to provide distributed light in my enclosure. I found this lights up the enclsoure better than a simple halo of light(loop around the top) and mostly minimizes direct light glare.

I use this 4000k COB 8mm wide LED strip which is 5V/USB powered cut into sections: https://www.amazon.com/gp/product/B08HD3ZSQV/

I cut the LED strip to fit my reflectors and solder leads together with this 22AWG 2 conductor wire: https://www.amazon.com/Conductor-Electrical-Stranded-Oxygen-Free-Automotive/dp/B0BRSRVHDG/ - or search for 22awg 2c

I wired these in series as much as I could to minmize wire use and groups of wires.

I use this zip-tie bracket for the small zipties that come with a Prusa printer:
https://www.printables.com/model/870296-zip-tie-mount

I mount the strips with ½" #6 wood screws: https://www.amazon.com/gp/product/B07YFPM4PX/

I use this dial to turn on and dim my lights: https://www.printables.com/model/870276-pwm-rotary-knob-w-faceplate

 

Tagi