Meile CX1 handle retaining clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This replacement part holds the CX1 vacuum handle into the shaft as stock replacement parts kept breaking.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 755
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- GNU General Public License v3.0
Being the sucker I am, I spent too much money on a vacuum to only have it break within a couple of weeks of owning it.
This model replaces it with something that requires much less parts and has been more reliable.
Print Parameters:
Printed in PLA at 0.2mm height with 3 perimeters. Enable supports on build plates only.
Post-Processing:
The clip part needs to be separated and will be a bit stiff. Push it out from the inside to pop it loose. I used some double sided velcro strips to tighten it on, but cable ties would also work. To release the clip from the handle pull it out by putting a nail or something under the small ridge and pull.
NOTE: REQUIRES BOSL2