Meile CX1 handle retaining clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This replacement part holds the CX1 vacuum handle into the shaft as stock replacement parts kept breaking.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 64
- Makes
- 0
- Views
- 738
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- GNU General Public License v3.0
Being the sucker I am, I spent too much money on a vacuum to only have it break within a couple of weeks of owning it.
This model replaces it with something that requires much less parts and has been more reliable.
Print Parameters:
Printed in PLA at 0.2mm height with 3 perimeters. Enable supports on build plates only.
Post-Processing:
The clip part needs to be separated and will be a bit stiff. Push it out from the inside to pop it loose. I used some double sided velcro strips to tighten it on, but cable ties would also work. To release the clip from the handle pull it out by putting a nail or something under the small ridge and pull.
NOTE: REQUIRES BOSL2