1 / 5
2" - 51mm - RC 3 Blade Spinner - 3dLabPrint Zivko Edge 540 48" — zdjęcie 1
1 / 5

2" - 51mm - RC 3 Blade Spinner - 3dLabPrint Zivko Edge 540 48"

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

2" 3blade Spinner Keyed and designed for high RPM Used on Zivko Edge 540 48" Eflite EFL01893 3 Blade Propeller

Ocena
0 / 5
Polubienia
9
Pobrania
149
Wydruki
0
Wyświetlenia
651
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Public Domain

Needed a better more true spinning spinner for my 3dLabPrint 48" Edge 540.

This one has prop access when mounted. 

Snug, centering hub fit for Eflite EFL01893 3 Blade 11x6 Propeller.

Uses M3 Heatset inserts with M3x20mm screws.

The tip keys into the base and there are tabs on the inside lip to keep it from spreading when tightened and during high RPM.

Made this from Polymaker PLA Pro

0.16mm Layer Height

100% Infill

It is very balanced right off the printer. Turns very true, and survived a NASTY wreck lol!

Requires Organic supports (See Image).

 

Hope this helps someone out of a jam! 

 

 

 

 

Tagi