Sanding Disc Storage for Wall Control
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Grit number printed on outer wall. Includes 5 and 6 inch models and with full and half size wall height variations
- Ocena
- 5 / 5
- Polubienia
- 77
- Pobrania
- 305
- Wydruki
- 4
- Wyświetlenia
- 1945
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This uses the DDD Printable Wall Control System (github) to mount the disc storage.
Use a good percentage infill or thick walls to keep this rigid.
For the sidepieces, I used the standard 2x2 angle inverted side brackets. Links: Left and Right. If using the half-height variants, I've included a version of the angle brackets which have two rows of mounting points.
I'd recommend using the locking spacers facing the wall surface, I used the 1x6 size for the 5" version, and 1x7 would be needed for the 6". Note that the 2x height would completely cover the wall, but I didn't find this necessary for support. These can be used to lock in the mount using the threaded pin.
Please let me know if it needs adjusting, I'll be happy to.