Sanding Disc Storage for Wall Control
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Grit number printed on outer wall. Includes 5 and 6 inch models and with full and half size wall height variations
- Rating
- 5 / 5
- Likes
- 77
- Downloads
- 305
- Makes
- 4
- Views
- 1,945
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This uses the DDD Printable Wall Control System (github) to mount the disc storage.
Use a good percentage infill or thick walls to keep this rigid.
For the sidepieces, I used the standard 2x2 angle inverted side brackets. Links: Left and Right. If using the half-height variants, I've included a version of the angle brackets which have two rows of mounting points.
I'd recommend using the locking spacers facing the wall surface, I used the 1x6 size for the 5" version, and 1x7 would be needed for the 6". Note that the 2x height would completely cover the wall, but I didn't find this necessary for support. These can be used to lock in the mount using the threaded pin.
Please let me know if it needs adjusting, I'll be happy to.