Magnetic Mini Bit Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mini Bit Holder that doesn't lose the bits! Also sticks to the fridge!
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 200
- Wydruki
- 8
- Wyświetlenia
- 855
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
All the mini-bit holders I've tried lose their bits after changing a few times.
I solved that by adding a small recess to house the 8mm x 3mm magnets we all get for the extruder gear visualizer!
Just insert a pause at the first hex-layer to lock the magnet in place. It's designed to allow the magnet to have full contact with the bit for a very secure lock.
The benefit of the magnet is this also doubles as a fridge-magnet so you never loose it!
Prints in under a half-hour!
G-Code attached for PETG print at .2mm layers with a pause to insert the magnet.
If you make this, please post a make!