Rectangular einstein tile planter with drainage holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A planter with drainage holes.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 446
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Public Domain
There are not that many rectangular planters with drainage holes available, so I created my own.
The pattern on the sides of the pot is based on the aperiodic monotile called the hat. If you are interested, take a look at this model or this one.
The non-repeating pattern made it difficult to model it, and the construction was quite complicated.
These videos helped with construction:
I attached the step file of the pattern itself. Note: I messed up the pattern somewhere, which is why there are some gaps.
Printing
For printing, I strongly recommend a brim for both parts.
I printed mine on the P1S (print settings are in the 3mf, just open it as a project with OrcaSlicer).
The bottom uses about 100g of filament and the top part ~300g (~400g in total) and took me ~10 hours to print with a 0.6mm nozzle.
The model should not be printed in vase mode, and it does not require any supports.