Zalman S3 TG PC case custom panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Zalman S3 TG PC case custom panel for ON/OFF and RR buttons.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 320
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
If you're like me and after you installed an AIO to this small ATX case you lost front USB because the radiator needs space to fit. That's no problem, but the empty holes was not pleasant to look at so I made a custom panel with custom ON/OFF and RR buttons. You can get them at ali express 19mm and 12mm diameter. Printed with PLA at 0.1mm layer height and used smooth geometry PEI bed to get nice surface, but I would recommend PETG, because the panel (for me) is exactly over the radiator, although after 2 months still no problems. Design uses original screws.