1/2" Bolt Thumb Screw, embedded Magnet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are thumb-screw caps for 1/2" bolts (3/4" or 19mm head) that have an embedded magnet.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 421
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
These are thumb-screw caps for 1/2" bolts (3/4" or 19mm head) that have an embedded magnet to hold them onto the bolt.
My use is for levelling feet on our folding camp table - which doesn't have enough room to store the feet when it's folded-up, so I wanted something removeable. Magnets work perfectly for this.
There are two versions - a 10mm x 2.5mm magnet which you can get on Amazon or Ali Express and a larger 12.75mm x 3.5mm magnet I get from Lee Valley. The Lee Valley magnets are much better, but a bit more expensive.
Set your slicer to pause while you insert the magnet and then continue printing.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
.2
Infill:
25
Filament:
Overture PLA Orange
Category: Outdoor & Garden