1/2" Bolt Thumb Screw, embedded Magnet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are thumb-screw caps for 1/2" bolts (3/4" or 19mm head) that have an embedded magnet.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 37
- Makes
- 0
- Views
- 421
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
These are thumb-screw caps for 1/2" bolts (3/4" or 19mm head) that have an embedded magnet to hold them onto the bolt.
My use is for levelling feet on our folding camp table - which doesn't have enough room to store the feet when it's folded-up, so I wanted something removeable. Magnets work perfectly for this.
There are two versions - a 10mm x 2.5mm magnet which you can get on Amazon or Ali Express and a larger 12.75mm x 3.5mm magnet I get from Lee Valley. The Lee Valley magnets are much better, but a bit more expensive.
Set your slicer to pause while you insert the magnet and then continue printing.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
.2
Infill:
25
Filament:
Overture PLA Orange
Category: Outdoor & Garden