Wine Bag Decapper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've always struggled with getting the caps off the large bulk-bags of wine. Prints at .3mm in under an hour.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 456
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
I've always struggled with getting the caps off the large bulk-bags of wine.
I've seen commercial units but they look too big/clumsy and I don't have a local supplier.
This is designed to pop the caps off easily and prints quickly.
There are may styles of bags/caps - this one is designed for caps approximately 40mm wide. It's a snug fit so the plastic hook part can be as strong as possible.
Printed flat it needs no supports and it seems to be strong-enough with a 40% infil. You might be able to get away with less - but it's a really quick print.
Scale the z-axis (if you're printing flat) to get a wider / narrower pry-tool.
I've included G-Code for .2 and .3 layer heights for PETG and .2 for PLA.
All print in under an hour.