Wine Bag Decapper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I've always struggled with getting the caps off the large bulk-bags of wine. Prints at .3mm in under an hour.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 1
- Views
- 456
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
I've always struggled with getting the caps off the large bulk-bags of wine.
I've seen commercial units but they look too big/clumsy and I don't have a local supplier.
This is designed to pop the caps off easily and prints quickly.
There are may styles of bags/caps - this one is designed for caps approximately 40mm wide. It's a snug fit so the plastic hook part can be as strong as possible.
Printed flat it needs no supports and it seems to be strong-enough with a 40% infil. You might be able to get away with less - but it's a really quick print.
Scale the z-axis (if you're printing flat) to get a wider / narrower pry-tool.
I've included G-Code for .2 and .3 layer heights for PETG and .2 for PLA.
All print in under an hour.