Beer Can Cooler (with air pockets for insulation)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Beer Can Cooler for your cold drinks. Includes air pockets to isolate your hand / ambient air from the can.
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 302
- Wydruki
- 3
- Wyświetlenia
- 1130
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Keep it Cool with this Can Cooler
It's getting warm outside and I wanted to enjoy a nice cold beer in the workshop. It happened multiple times that my beer or lemonade got warm after a short time so I made this can cooler to see if it could work.
Tight fit for long effect
I made multiple iterations and found a nice tolerance that lets the can slide in with minimal air surrounding it. The air slows the can down when dropping it in and even makes it pop when removing it fast, without much friction.
It works surprisingly well
But of course it can not compete against a vacuum sealed container or neoprene sleeves. After all, it's still just PLA so eventually your drink will get warm. But it slows the process and that's the main goal.
Enjoy your cold drink - cheers!