gridfinity V6 nozzle organizer vase mode
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organize your spare V6 nozzles with this gridfinity compatible nozzle organizer. Save time printing it in vase mode!
- Ocena
- 4,5 / 5
- Polubienia
- 13
- Pobrania
- 69
- Wydruki
- 2
- Wyświetlenia
- 305
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Organize up to 8 V6 nozzles with this fast-printing gridfinity-compatible nozzle box, then get back to printing! Total print time is around 40-50 min.
Inner organizer
The organizer insert is especially designed to print in vase mode, cutting down print time drastically (31min on a Prusa MK3S+ bed slinger). The organizer can be printed alone and used within a gridfinity grid without the outer shell, although it might be just subtly looser. But if you like the idea of having the bottom closed off, print the outer shell as well.
Print this model nozzle-holder-side down!
Outer shell
The outer shell is usable as a container as well as a lid. You can also print this outer shell as a standalone gridfinity container if you like, but there are probably better designed options for this. Being much simpler, this is a quicker print, especially in vase mode (around 15min on a Prusa MK3S+).
Print this model base-side down!
Design
The outer shell is designed to the gridfinity spec, including a clearance of 0.25mm between itself and the gridfinity grid (as the spec suggests). I have designed the inner shell to have a clearance of 0.5mm between it and the outer shell, this results in a light friction fit if you print with a 0.4mm nozzle. You can hear the layer lines zip past each other as you nest the inner and outer shells, but this will be loose enough that you can get them back apart.
The nozzle holding holes are 6.4mm in diameter; a V6 nozzle is around 6mm so the fit is loose enough to pluck them out easily. Each hole tapers to a point with a 60° overhang for easy layer stacking. The slotted ribs not only stabilize and stiffen each hole, but also make vase-mode possible by having one perimeter to follow.