1 / 1
roof rack with ski rack for 1/10th audi avant rs6 from APPLASTICS
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Head to the mountains with your favorite board or skis in style!
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 452
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
roof cross bars fit the 1/10th audi avant rs6 from APPLASTICS.
ski rack itself has a 1mm gap between the “rubber” holders. Print your snowboard or skis to fit.
I did not save the prints in any specific orientation but they are flat and simple so just use auto face in your slicer.
Supports can be beneficial depending on what filament you use.
Photographed in asa after vapor smoothing/painting