Magnetic Tentacle Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A magnetic coat hook for my office cubicle.
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 195
- Wydruki
- 3
- Wyświetlenia
- 1540
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a coat hook for my office cubicle and decided I wanted a magnetic one that I could stick to any metal cabinet. It's plenty strong enough for a light weight jacket, and will hold an adult leather jacket as long as you don't brush up against it. Remixed from: https://www.thingiverse.com/thing:4822459
Required parts:
(5) 10x5mm N50 Super Strong Round Rare Earth Neodymium Magnets
(5) Scotch/3M 1/2" (12,7mm) Bumpers
*Note: The bumpers are necessary to stop the hook from sliding down the metal surface of the cabinet once you put some weight on it.
**Required Steps:
You have to insert a filament color change operation just before the internal magnet pocket tops are covered so that you can insert the magnets during printing.
Print Settings
Printer Brand: Prusa
Printer: i3 MK2S
Rafts: No
Supports: Optional
Resolution: .2 mm
Infill: 30%
Filament:
Purple MatterHackers Build Series PLA Filament - 1.75mm
Notes:
You need to insert a pause or filament color change operation just before the layer that covers the internal magnet pockets so you can insert the magnets.
Post-Printing
Assembly Notes
Stick the 5 bumpers into the holes made for them on the bottom.
How I Designed This
About the design process...
I run Ubuntu Linux on all my home computers. This limits my choices for CAD software so I have taught myself how to use FreeCAD since there is a native Linux version that seems to be getting more stable as time goes by.
Category: 3D Printing