Moving latches for drawers (no assembly requirements) lock system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Moving latches for drawers ( lock system) Fast and simple print! Works in drawers with 15 to 25mm of side distance.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 150
- Wydruki
- 0
- Wyświetlenia
- 910
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Amazing simple and minimalist latches for your drawers.
Are special to keep pets, children or thieves away!!!
Everytime when i leave of my room and i leave door open my dog enter and open my drawers and she thief my papers xD!!!! so i decided to design a minimalist and simple strong lock system with a moving part in only 1 print without assembly or supports requirements.
only needs a little piece of double sided tape to attach at side of your drawers and enjoy!
I loved the results so i decided to share with all you (check the videos)!!
-Please check the side where you going to set the latch, i upload a left and right design.
-Works in drawers with 15 to 25mm of side distance. (all mines are of 15mm)
Settings:
- 0.2mm layer height and 20% of infill is ok (37 minutes) but you can do a speeder print with bigger layers (21 minutes in 0.3mm)
- print with NO SUPPORTS! (if you activate the supports the pivot dont will work).
note:
- The A is for my twitch channel @Astroworks_cl please follow me!
TEST OF DRAWER WITHOUT LATCHES
DRAWER WITH LATCHES