Moving latches for drawers (no assembly requirements) lock system
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Moving latches for drawers ( lock system) Fast and simple print! Works in drawers with 15 to 25mm of side distance.
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 150
- Makes
- 0
- Views
- 912
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Amazing simple and minimalist latches for your drawers.
Are special to keep pets, children or thieves away!!!
Everytime when i leave of my room and i leave door open my dog enter and open my drawers and she thief my papers xD!!!! so i decided to design a minimalist and simple strong lock system with a moving part in only 1 print without assembly or supports requirements.
only needs a little piece of double sided tape to attach at side of your drawers and enjoy!
I loved the results so i decided to share with all you (check the videos)!!
-Please check the side where you going to set the latch, i upload a left and right design.
-Works in drawers with 15 to 25mm of side distance. (all mines are of 15mm)
Settings:
- 0.2mm layer height and 20% of infill is ok (37 minutes) but you can do a speeder print with bigger layers (21 minutes in 0.3mm)
- print with NO SUPPORTS! (if you activate the supports the pivot dont will work).
note:
- The A is for my twitch channel @Astroworks_cl please follow me!
TEST OF DRAWER WITHOUT LATCHES
DRAWER WITH LATCHES