Counting matching models…
After getting cheap round hygrometers and printing a bunch of hygrometer lids I found that they would not fit because they are tad too large to go through the lid opening in the original lid and have very hard latches which do not…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
shelf latches
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker You will need six M3x30mm socket head fasteners for the main…
Parametric Storage Box – FreeCAD edition Inspiration & credit This design is inspired by the excellent SnapLock V3 box by Hugo on MakerWorld (link above). The snap-latch and hinge concept comes from his work – all credit for the idea goes…
Please refer to the image file attached for parts reference. Included latches and hooks are; Hook 1 Hook 2 Padlock Double Eye Padlock Eye Barrel Slide Lock - Print in place Push Latch (Latch1A) - Print in place Push Latch External Catch…
The original design is good. However, I am an engineer so I designed a few improvements for the design (make it more functional, less filament, repairable, etc) and saw several people in the original and remix comments had some good ideas…
These should work with any DeWalt Tough System latch. It may also work with the T-Stack system too, but I have not tested them to be sure. I will leave that to the community. I have included a 3MF file for Bambu Slicer and a Generic one.…
Reparación y sustitución de los cierres de las caja de herramientas de Mannesmann, en lugar de utilizar el sistema original, se requiere pasadores de 2,2mm de diámetro y 11mm de largo. Impresión: Filamento ASA con balsa adicional para…
A plain lidded box with rounded corners. The lid holds on latches. Download .scad, set dimensions and wall width as you like. If you change the wall width, consider tuning the latch. Print instructions Notes: The .scad file has a…
Intro I recently acquired a used Game Boy Micro. Like most Micros, the faceplate latches were broken and the previous owner used double sided tape to hold the faceplate in. Surprisingly I found that there existed no proper solution to…
I really liked richardjm's convenient snap latches - although was put off my reports of broken filament hinges. I decided to replace the filament hinges with 1.5mm metal pins, to side-step this issue - with the pins the latches also seem…
After making the Magnetic panels with Magnet Inserts by Le0n I decided I really liked his design and wanted to replicate his design for the latches on the front of my 2.4 r2. I did use his design for inspiration, but I did design this…
Remix of original short and long latches with 2.5mm pins.
Amazing simple and minimalist latches for your drawers. Are special to keep pets, children or thieves away!!! Everytime when i leave of my room and i leave door open my dog enter and open my drawers and she thief my papers xD!!!! so i…
The AtGames Legends Pinball (ALP) has two openings to the interior of the cab - both covered with locked doors. I'm sure there are those who want to restrict access to the ALP interior and appreciate the locks, but I'm not one of them.…
A new latch that is low profile (easier to access boxes in a stack without bumping another latch off) and MUCH tighter than stock latch. Designed specifically for this product:…
Designed in Fusion 360 to fit the Dummy 13 model, but would work for figures like Lucky 13, GI Joe, or others. Use 6mm x 2mm magnets for the latch, 1.75mm filament for the hinge. I printed the lid vertically with minimal supports. These…
dxf's uploaded as Printables does not like my stl's. Printed in PETG on Bambu Lab P1P. May require a little sanding to get the correct fit, each fitted differently when I made them, but minimal sanding yielded good results.
While I like this redraw of the Frogbox 2.0, as it scales better to larger sizes, the latches left a bit to be desired. After finding the cam latches from the original Frogbox 2.0 didn't fit I set out to design my own. The regular latch…
Printed using ABS, PETG could work too. Designed for 3mm enclosure panels on 2020 extrusions. Print settings used: 3 walls at 0.42mm outer wall and 0.6mm inner wall Print 2x of the latch handle and latch base. Requires 2x M3x6mm screws to…
Minimalist travel case custom-designed to hold just the Philips Multigroom clipper —no attachments, no extras, just the essentials. Perfect for those who travel light but still want solid protection for their grooming gear. This case…
I found opening the latches for the great gridfinity storage box https://www.printables.com/model/543553-gridfinity-storage-box-by-pred-now-parametric quite a struggle with my big sausage fingers, plus when two boxes stacked - the latch…
I modelled a box with compartments to store a rock collection. The screws are M3 x 20. I printed the top and bottom using PLA and the latches using PETG. Latch.3MF is a looser fit than Latch V3.3MF. Feb. 22/24: Added the top with dividers…
This adds two different latches for gloves or is much easier when they fit tight. I have printed it with PETG, and it works great. They can be scaled to fit tighter or more loosely.
My printer lacks the ideal tolerances for printing the original file ( https://www.thingiverse.com/thing:1544407 ) with moving latches... after printing and breaking a couple, I realized I could narrow the latches with very little effort.…
I've created the replacement part for the armrest latches of my Hyundai Sonata 2008, in my case they work great when printing them with SLA printer. He creado repuestos para los clips del reposabrazos de mi Hyundai Sonata 2008. En mi caso…
About this remix The Rugged Box (Parametric) by Whity is an excellent, robust design that is particularly well-engineered. However, when using it to create small-sized boxes, particularly with heights below 20 mm, I encountered certain…
I use these clips in conjuction with two rows of Tespo™ panels to make a rabbit pen with a bottom-hinged gate in in its top row to let kids through.
Got 3 versions here, 1 is the original Gunpla Mark's lid but uses seperate latches that use 4mm rod as a hinge pin. 2 is Gamgroll's version that uses the original gasket, also with 4mm hinge pins. 3 is also Gamgrolls version but uses…
Overview This is a rugged, 3D-printable anchor tab bracket designed to hold latch bars, tie-downs, cords, or carabiners in place. Originally designed as a keeper for a barn door latch, it's proven useful as a universal mounting point for…
Uses the same 6x3 magnets as the rest of the enclosure, and the original hardware for the latch. Easily adjustable.
Replacement waste bucket latches for a Hoover SteamVac carpet cleaner. My model is F5914-900. OEM Part numbers should be: H-36151029, and H-36151019 We broke the left latch, and when I recreated it, and installed the replacement I noticed…
Design I've printed the original TS100 case with the double layer remix. Sadly after a couple months of use the hinge broke off, because the lid wasn't supported. That made me think, why not design an remix which has 4 latches instead of…
Simple ABS hinges I needed for storage container Print Settings Printer Brand: Creality Printer: K1 Rafts: No Supports: No Resolution: .2mm Infill: none Filament: any ABS any Notes: ABS so no screw or bolt holes as I weld to other ABS…
Replacement latches for Petmate Kennel Cab pet carrier. Both the small and large latches are included. Print Settings Printer: FlashForge Creator Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Notes: Print standing straight up.…
Sliding Door Latches, I've used PETG to print is as it needs to be a little flexible, not sure how PLA will hold
I wanted to get my latches perfect on each corner of my 2.4 and trident so I drew this corner piece in solidworks.
Parametric Fusion model of a two part box using two side latches. The latches are designed to use standard bolts and hex nuts for the hinge and catch. The chamfers/filets are designed to not need support if parts are oriented on the…
This is a remix of suit's gridfinity box, I've added an extra row of bins for a size of 6x6x5U and added side latches. The latches can be found in the R3 - common parts in suit's model:…
Traverse 2018 Front Rear Latches It is better to use ABS or any filament can handle the out side temperature to avoid wrapping (glass transition). Note: The rear latch has larger holes but wider surface so you can use double sided tape to…
Attaching STEP and Fusion360 files for your customizing. "Top" part requires supports. Label size: 12x38mm
This is a BMW ZF5 Shift Pin Punch Tray/Box with Double Latches. This works with the commercially available metal punches from Thayer Motorsports and is a remix of https://www.printables.com/model/209302-bmw-zf5-shift-pin-punch-tray by…
After seeing this door bolt by @neuttrino, I thought this would be a good idea for keeping our cat from playing in the cabinets. The design didn't quite work in my situation, though, so I did a complete redesign. This is designed to be…
Easier to support and print latches and parts for the Medkit by UnimatrixRed
TL;DR Use my stacking latch, offset or not, for no-interference stacking of 6U boxes. Using Gridfinity Generator at https://gridfinity.perplexinglabs.com/pr/gridfinity-rugged-box/0/0 , which I believe is based on bulbasaur0's work, I…
Two supports available, one that would have very low tolerance and one with higher distance, in my case the one with higher distance worked best. Models made with cheap 6x3mm magnets in mind, those purchased from aliexpress or other…
Easy print PLA or PETG will work.
'Left' and 'Right' latch models are labeled as viewed from the perspective in the reference photo (handle side closest to you). Print Settings I printed this as solid as I could get it with three perimeters on a 0.4 nozzle. Nothing about…
I store my filament in Sterilite 19324306 20-Quart Gasket Boxes with Blue Aquarium Latches. I use loose bead desiccant, so I wanted a tray to keep the spools out of the beads. Additionally, it helps prevent the beads from sliding around…
Required materials: Wood strips (5 mm depth × 20 mm width, available at OBI) Slim hinges (60 × 35 × 1 mm) ABS filament for 3D printing BISON EPOXY 5 MIN glue Wood clamps (for holding parts together) Stapler (for attaching the insect net)…
Inspired by a model made by @Denitz which I've used for some time until it wore out. The original had an issue that the device would slide out if tilted, which was annoying at times. My model was designed with two small inner latches…
Do you use the Milwaukee Packout System for your Pinecil soldering iron? Do you hate digging through the stack of packout bins searching for which one holds the correct tools? Look no further! I recommend printing in PETG or something…
Despite the dowels being advertised as M1.5 they were not 1.5mm diameter but closer to 1.7-1.8mm I remixed both 4mm and 6mm versions by punching cylinders through the holes to cut a wider hole in FreeCAD. Probably not the best way to do…
Print them on their side, 5% Infill and 2 walls is enough. This works best on more rigid boxes. I use hot glue for these. Be careful if choking hazards are an issue, these are smaller than most prints(5 grams of plastic for a full set!).…
I made these side latch things for my Simlab P1X Pro to connect a six-point harness. Also made groin area latches that are a separate download. Advise printing these so that the loop is parallel to the printing bed to withstand most…
I made these under side latch things for my Simlab P1X Pro to connect a six-point harness – these are the groin area latches. Advise printing these so that the loop is parallel to the printing bed to withstand most force. Requires M8…
I added an OpenBuilds Enclosure https://openbuildspartstore.com/enclosures/ to my CNC Lathe to keep the chips from flying everywhere and to get the doors to latch shut, I designed and printed some brackets that had spots to insert 4mm…
Replacement for the unreliable cabinet latches found in campers from Dethleffs (and likely other brands). The original latches sit too low and interface poorly with the lock, causing cabinets to occasionally fly open while driving.…
Using the original, I ran into a few issues - The heatsets are in pull-out orientation, which isn't ideal, especially if using an auto driver. The final magnet flush-ness was extremely sensitive to the heatset placement - if the heatset…
These are 7.5mm latches. the cad can be modified for different thicknesses and tensions. It's a full redesign but heavily inspired by:
Full panel door clips for voron or cube style frames. They are offset from the frame enough to allow for quick release side clips. It works in that regard, the side clips need to be unclipped with these closed, its fiddly but works. They…
Only latches for straps Used filament - PLA 100% infill Arachne perimeters
Customizable OpenSCAD Window Latches for Mounting an Exterior AC Panel I made these because I bought a Midea PortaSplit mobile air conditioner. It has an outdoor unit connected to the indoor unit by a hose. Midea sells a sealing system…
Print without supports
Multiple camper furniture locks, designed for BSB3030 camper furniture. Router guides included There'se a large (hand) and small/medium (finger) model, both designed to be used in self build BSB3030 extrusion profile furniture with 9mm…
These bins were made to hold the 30mm latches commonly used for the "Rugged Box" models. They hold 10 each and stack on top of each other for easy storage. The original rugged box can be found here.
The model that my remix is based off of improved upon an already great system. In my remix, I incorporated screws into the hinge joints and lengthened the latches. While print-in-place and hardware-less hinges are great and have their…
Star Wars Bambu labs P2S door latches - may fit other bambus Please support me by following me
The latches on my Sovol SH-01 got brittle and one broke completely and the other one was on it's way so I modeled a replacement latch based off the original design beefing it up a little so it's not quite so thin. You may have to drill…
Overview : Years ago, I made a “Splat the Rat” game for our church festivals and had come up with a fancy collapsing set of legs and braces to make it more compact for storing. However, it was a pain to fold all of the legs and braces at…
tight and secure i made mine with petg cf for extra strength
🛠 Replacement latch for King Tony toolbox (model 87404). Modeled from the ground up to replace fragile standard latches that break easily. It is highly recommended to print this part in a strong filament (PETG, ABS, or ASA) with at least…
Physical latches that hold Shift and the three modifier keys left of the space bar down, so you can type shortcuts with one hand. No software, works on every device you pair. Who it helps People who type with one hand (amputation, stroke,…
I started to bring my phone on the bus, but I didn't want it to get crushed in my back pack, so I found a box for my phone. But the box I printed needed a rubber band to work, so I found hinges and attached them to the box. To assemble,…
A practical 3D-printed mounting plate and push button for campervan and caravan cabinet doors. This set is designed for use with a separate push-button cabinet latch, the type commonly found in campervans, motorhomes and caravans. The…
Printed using ABS, PETG could work too. Designed for 3mm enclosure panels on 2020 extrusions. Print settings used: 3 walls at 0.42mm outer wall and 0.6mm inner wall Print 2x of the latch handle and latch base. Requires 2x M3x6mm screws to…
These bins were made to hold the 30mm latches commonly used for the "Rugged Box" models. They hold 10 each and stack on top of each other for easy storage. The original rugged box can be found here.
I made these side latch things for my Simlab P1X Pro to connect a six-point harness. Also made groin area latches that are a separate download. Advise printing these so that the loop is parallel to the printing bed to withstand most…
I made these under side latch things for my Simlab P1X Pro to connect a six-point harness – these are the groin area latches. Advise printing these so that the loop is parallel to the printing bed to withstand most force. Requires M8…
Got 3 versions here, 1 is the original Gunpla Mark's lid but uses seperate latches that use 4mm rod as a hinge pin. 2 is Gamgroll's version that uses the original gasket, also with 4mm hinge pins. 3 is also Gamgrolls version but uses…
TL;DR Use my stacking latch, offset or not, for no-interference stacking of 6U boxes. Using Gridfinity Generator at https://gridfinity.perplexinglabs.com/pr/gridfinity-rugged-box/0/0 , which I believe is based on bulbasaur0's work, I…
Star Wars Bambu labs P2S door latches - may fit other bambus Please support me by following me
The original brims are very hard to remove so I got rid of them. All credits to Matthew @unrepentantgeek
Diese Variante geht einmal seitlich nach rechts raus und winkelt nach unten ab. für bosch advancedvac 20. Adapter für die Kappsäge und den Staubsauger von Bosch. Freigänge Funktionen. Material PLA.
The latches on my Famex ratchet case have been broken for years. I’ve finally gotten around to designing replacements using FreeCAD . Maybe this will be useful to someone else. I used 6 M3x12 self-tapping screws for assembly. The two…
![[Latches remix] DJI Neo Adventure Command Center](https://media.printables.com/media/prints/1079382/images/8162420_2db14be4-4f8a-43aa-8a54-be5d060c20fb_21dc12ca-2e59-45d3-86f5-c19b03d74aa3/img_2948.jpeg)
