Internal cable channel for BentoBox v2.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the original BentoBox v2.0 to route cables internally.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 74
- Wydruki
- 1
- Wyświetlenia
- 895
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As I was buildig the BentoBox (which is an absolutely brilliant product) I did not like the fact the cables could not be routed in a way that they are completely out of the airflow. I remixed the fan case and the duct to make the whole thing more streamlined.
Printing instructions:
I used Bambu ABS and default settings, cable channels should print without support.
Power distribution box
You can see on one of the pictures, that I also made a little “control box”. It houses only a switch, and the connectors for the fans, it is literally a box with two holes (power and switch), and a lot of hot glue. If you copy it make sure it is out of the way of the bed.