Aomway Commander Battery Adapter Case with Goggle/Belt Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Aomway Commander Goggles battery adapter case with both an optional goggle clip or belt clip. You will need M2 fixing…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Aomway Commander Goggles battery adapter case with both an optional goggle clip or belt clip. You will need M2 fixing hardware, M2 x 16mm if you are using either of the clips or M2 x 12mm if you just want the case. M2 nuts are required for retension, these are tricky to insert - you may wish to use your soldering iron.
If you like this design I would appreciate makes or constructive feedback or if you wanted to leave that a tip that would be greatly appreciated.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
0.1
Infill:
25-100
Filament:
Prusa PLA Silver
Notes:
Put the case, top and goggle clip flat on the bed when you print them, print the belt clip standing up on the top of the clip.
Category: R/C Vehicles