Aomway Commander Battery Adapter Case with Goggle/Belt Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Aomway Commander Goggles battery adapter case with both an optional goggle clip or belt clip. You will need M2 fixing…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 196
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Aomway Commander Goggles battery adapter case with both an optional goggle clip or belt clip. You will need M2 fixing hardware, M2 x 16mm if you are using either of the clips or M2 x 12mm if you just want the case. M2 nuts are required for retension, these are tricky to insert - you may wish to use your soldering iron.
If you like this design I would appreciate makes or constructive feedback or if you wanted to leave that a tip that would be greatly appreciated.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
0.1
Infill:
25-100
Filament:
Prusa PLA Silver
Notes:
Put the case, top and goggle clip flat on the bed when you print them, print the belt clip standing up on the top of the clip.
Category: R/C Vehicles