Puddle Jumper MMU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Painted in PrusaSlicer 2.4.0-beta1 in case you have an MMU or equivalent
- Ocena
- 5 / 5
- Polubienia
- 148
- Pobrania
- 744
- Wydruki
- 1
- Wyświetlenia
- 3648
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
- Red bits
- Gold/yellow drone bits
- Black/Dark Gray bits
- Lighter Gray bits
- Outer olive/bronze bits
Painted in PrusaSlicer 2.4.0-beta1; won't work with version 2.3.3 or earlier.
Simply load up each .3mf file as a project into [at least] PrusaSlicer 2.4.0-alpha1 (i did these using beta1) and the painted segments and supports should be on each applicable part. Feel free to move each part around and/or modify any print settings as you'd like - these settings are simply what I used and come as part of the file.
I oriented the long top part vertically so it blends together with the front and back parts better; the supports for the peg holes might not actually be necessary.
Also you may want to size down the long pins to 97-98% to make it easier on your thumbs.
Original model by Martin Taichl.