1 / 4
Body holder spare piece for 1:16 RC car (SCY 16101, 102, 103 etc.) (.scad file included) — zdjęcie 1
1 / 4

Body holder spare piece for 1:16 RC car (SCY 16101, 102, 103 etc.) (.scad file included)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A spare (and stronger) body holder piece for SCY 1:16 RC car

Ocena
5 / 5
Polubienia
42
Pobrania
223
Wydruki
1
Wyświetlenia
1548
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

When this little beast lands on rooftop, this piece can easily break.

I designed a spare, much stronger part.

Fitting perfectly with 0.2mm layer height print.
Make sure you slice with 100% infill.

No need for supports.
No need for raft or brim if you have good build plate adhesion.

I have keep 3 positions, but if you want strenght only use the top one.

I provide OpenSCAD file if you want to modify the piece.

 

Do you like my design?

Print, upload your MAKE, receive Prusameters!
Please leave a “like” …. ❤
Feel free to follow me …. ✅

Tagi