1 / 2
Replacement RJ45 Ethernet Clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement RJ45 Ethernet Clip
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 181
- Wydruki
- 0
- Wyświetlenia
- 740
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (19)Powiązane
There is nothing worst that breaking off the little clip on that long ethernet cable after its been ran through the ceiling and down the wall. Well, maybe trying to 3D print a replacement clip, because they are not design well or the orientation makes it weak.
I design this replacement clip to print flat, giving it strength and the connector is at an angle making it ridge.
Some auto tree supports might be helpful. Do not change the orientation. Otherwise it prints well.
It locks into the ethernet port, unlike some many others.
Enjoy!
-D3