Cascade Wallet w/ Pocket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'd seen plenty of these, but none quite what I wanted. This version holds 4 cards and has a full length pocket.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 113
- Wydruki
- 1
- Wyświetlenia
- 731
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
After looking at every cascade wallet model around, none met my needs. So I made a new one.
This one holds 4 cards and has a pocket on the back for non-rigid cards/papers (insurance, cash, etc.).
Print standing (stl and step should import in correct orientation), gently release the arm as it tends to stick just a bit, push the arm or the spreader (from underneath) to free the mechanism. It generally frees up and swings smooth after a few movements.
Clearances are set at 0.2mm and I've successfully printed in PLA, ASA, and PETG on multiple printers.