MIN_SB01_80
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My take on Rolohaun's Delta machine "MIN"
- Ocena
- 5 / 5
- Polubienia
- 90
- Pobrania
- 238
- Wydruki
- 1
- Wyświetlenia
- 1988
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Welcome! Your MIN journey has begun!
I was super excited when Rolohaun released his micro delta MIN, Obviously I had to make a few changes to satisfy my desire for compact mini machines!
(The aluminium Bed Plate is custom, if there is enough interest I will make them available to purchase)
If you like what I create you can buy me a coffee here: paypal.me/handfullofnuts
Thank you : )
CHANGELOG 030624:
Updated/Added
- Arm Jig Model
CHANGELOG 270524:
Updated/Added
- BOM
- Assembly
- Carriages and Effector now using M3x30 with sq-nuts instead of 5x50 Standoffs
- Slotted CABLE_CHANNEL lower fixing holes to compensate for shrinkage/expansion
- Orbiter 2.0 mount
CHANGELOG 170524:
Updated/Added
- 6 or 10mm wide drive belt options.
- Lower cable channel mounting holes relocated.
Click HERE to view in 3D
Click HERE to view BOM
Have a look at the original MIN
Changes include:
- Revo micro hotend assembly with dual 3010 fans
- 9 or 10mm wide belts
- Idler mounts
- Motor mounts
- Carriages with Apex Belt Clips
- 80x75mm Build volume
- 100mm heated build plate
- Modular Mainboard mounts
The assembly has motion joints applied, check the component drag under select or move feature to articulate the motion system of the printer.
Have a look at the original MIN
Useful information:
CARRAIGE OFFSET = 16
ARM ANGLE = 62.1
EFFECTOR RADIUS = 23
MIN ANGLE = 20
MAX ANGLE = 90
RADIUS = 40.239
arm_length: 86
delta_radius: 63.239
print_radius: 42.5