Double Cap/Hat Hook REMIXED for HSW
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hang multiple caps neatly and have easy access to all of them. Remixed to fit RostaP's HSW Honeycomb Storage Wall.
- Ocena
- 5 / 5
- Polubienia
- 74
- Pobrania
- 210
- Wydruki
- 2
- Wyświetlenia
- 839
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I remixed my original Hat/Cap hook to be compatible with RostaP's Honeycomb Storage Wall (HSW). Shout out to @RostaP for uploading the STEP files, which made it so much easier to retrofit. Also, big thanks to @DrPanda_583335 for giving me the idea.
This cap hook is designed for those who have multiple caps and need additional storage. With this hook, you can neatly store multiple caps and have easy access to each of them.
The hook is designed for, and works best with, caps with an open back and have a clasp. Like the below image.
Installation: Install backing plate (Top side UP) onto HSW by pressing firmly until it clicks. Then, slide hook onto backing plate until it CLICKS. Remove in reverse order.
My original Cap/Hat Hook uses a 3M Command Strip that can be installed almost anywhere it'll stick. You can find that model at the following link: https://www.printables.com/model/848941-double-caphat-hook
Required!!:
This Model is only compatible with RostaP's HSW which can be found at the link below.
https://www.printables.com/model/152592-honeycomb-storage-wall
Recommended:
- I printed my in PETG
- Print with at least 4 wall loops for extra strength
- 20% Honeycomb Infill
- If you are having fitment issues, try printing the looser fitting backing plate.
If you are having issues, please, don't just give me a crapping rating and comment “Your design sucks”. I am willing to make changes and make the design better for everyone!!