Coping saw blade handles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handles to attach to coping saw blade and saw without need for traditional coping saw.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 255
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed to cut a precise hole in a board already mounted (back wall of my enclosure) for an exhaust fan. It was too far from the edge for the frame of the coping saw to get in, and after a couple minutes of using the bare blade I knew I could make a more useful tool with handles to attach to each end. The version in the photos was the prototype before I filleted the corners and edges for a more comfortable grip.
You will need 2 prints of each model, and 4 M3x4 heat-set inserts and 4 M3x10 socket head (not button head) screws . I didn't want to use nuts that could fall out while trying to get the handle on one side which was in a tight spot.