Coping saw blade handles
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handles to attach to coping saw blade and saw without need for traditional coping saw.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 20
- Makes
- 0
- Views
- 255
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed to cut a precise hole in a board already mounted (back wall of my enclosure) for an exhaust fan. It was too far from the edge for the frame of the coping saw to get in, and after a couple minutes of using the bare blade I knew I could make a more useful tool with handles to attach to each end. The version in the photos was the prototype before I filleted the corners and edges for a more comfortable grip.
You will need 2 prints of each model, and 4 M3x4 heat-set inserts and 4 M3x10 socket head (not button head) screws . I didn't want to use nuts that could fall out while trying to get the handle on one side which was in a tight spot.