Anderson Powerpole Retention Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip to prevent vibration/tugging from separating Anderson Powerpole connectors
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 192
- Wydruki
- 3
- Wyświetlenia
- 740
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Prevent your Powerpole connectors from accidentally separating. The clip fits into the existing retention holes with a slip friction fit. Still removable by fingers thanks to a ridge on the clip, but will stay under vibration and normal usage.
Use with a single connector set, or add as many as desired for triple, quad pairs, etc.
Has been tested to >20lbf pulling force along the wire in PA-CF, with similar results in PLA and ABS. Must be printed laying FLAT on the print bed (otherwise the pegs will shear off).
Works with PP15, PP30, PP45 housings.