Holder organizer for fixed wrenches
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple but effective way of organizing some wrenches
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 386
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
A simple but effective solution for organizing a few common size wrenches. In order to avoid the need for supports I included a very thin wall between the top and bottom hinges of the base part. This thin wall is only 0.2 mm thick so it is very simple to remove after print. Also in order to have a clean hole for the top hinge, I added a sacrificial layer to the hole of 0.2 mm. This layer will simply be pushed away when you assemble the piece.
The two parts, top and base, stay together using a piece of 1.75 mm filament. All tolerances are included.
Happy printing!