Top Coat trowel tool for Epoxy River Table
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 5x10in notched trowel for the final top coat of an epoxy table. 1/8" x 1/8" grooves for a smooth and level finish.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is a notched trowel for the final hard coat of an epoxy table. Made with 1/8" x 1/8" grooves for a smooth and level finish coat. I couldn't find one out in town made of a softer material (don't want a metal one that might leave shavings behind), so I took the opportunity to teach my oldest son how to do a little 3d design. Mind Blown!
I turned off ironing because I needed it right away, but it might be a good option if you have the time. Smoother surface without gaps in the layer will prevent it from soaking up resin.
I mean, technically you could use this for grout and cement as well :) I won't tell anyone you did.