Top Coat trowel tool for Epoxy River Table
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.92 – €2.34 net (excluding VAT)
For file: Top Coat tool.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.13 excluding VAT (range midpoint).
- Weight reported by the author
- 41 g
- Print time reported by the author
- 1.44 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A 5x10in notched trowel for the final top coat of an epoxy table. 1/8" x 1/8" grooves for a smooth and level finish.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 47
- Makes
- 0
- Views
- 186
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This is a notched trowel for the final hard coat of an epoxy table. Made with 1/8" x 1/8" grooves for a smooth and level finish coat. I couldn't find one out in town made of a softer material (don't want a metal one that might leave shavings behind), so I took the opportunity to teach my oldest son how to do a little 3d design. Mind Blown!
I turned off ironing because I needed it right away, but it might be a good option if you have the time. Smoother surface without gaps in the layer will prevent it from soaking up resin.
I mean, technically you could use this for grout and cement as well :) I won't tell anyone you did.