Search results: trowel

Splatula / Trowel

Flexible spatula for cleaning and treatment of plaster and stucco. Print on PETG with 5 perimeters, 15% infill, Gyroid recommended.

Narrow 8mm Notched Trowel

Needed a narrow trowel for adding thin tiles along the edge of the floor. Standard notched trowel was too large to fit 8x8mm notches 72mm wide Printed in PETG

Double Ended Thermal and Solder Paste Spreading Trowel

Double-ended trowel used to spreading thermal or solder paste onto either a PCB. PCB Stencil or a CPU. Two separate files one with the label of our website and a second unlabeled one. Dimensions: 122mm x 24mm x 5mm

Long Square Notch Glue Spreader/Trowel

just needed the original model to be a little longer to speed up application.

1/2" Trowel for Schluter Heating Systems (Wire-Safe)

If you are installing a Schluter Ditra-Heat floor system (or any radiant heated floor), you know the anxiety of spreading thinset over those expensive heating cables. One slip with a sharp metal trowel can nick a wire and ruin the entire…

Trowel Box

It is 2 pieces that should fit on a 3d printer with a print bed at least 8"x8". You will need to split the file inside of your slicer. The blade attaches to the base using 3 M6 screws. The ones I used were 16mm long. There are hexagonal…

Cap for Vargo Dig Dig Trowel

This is a cap specifically designed for the Vargo Dig Dig Titanium trowel. This trowel (as is the case with most titanium backpacking trowels) can be a bit rough on your palms, especially when digging hard or rocky ground. This cap slips…

Notched trowel

I did some decor tiles in the room. To apply the bond evenly, I needed a tile scraper. I could buy them and use them, but I have a 3D printer so I'll have to make them. It was modeled to be approximately 4 inches by 6 inches in size.

Corner Trowel with angle adjustment

Exact angle trowel adjusts to suit the task you are working on from 90 to 160 degrees. Thank you for every review, like and donation, It motivates and helps to implement new projects! Print Settings Rafts: No Supports: No Resolution: 0,2…

simple and strong plastering trowel

simple and strong plastering trowel

Trowel/spreader

Spatula handle/ trowel or spreader i don't know what's it called, but here it is. Hight. 100mm Wide. 150mm Thooth. 2mm

mini trowel hubba ledge

measures 3 inches tall 10 inches long and 2 inches wide.

Sandbox Trowel

A sandbox trowel I've been iterating on for my kid. It's been getting regular use at the playground with a range of kids (aged 1-6yo) and durable enough so far. The overhangs are set so it can be printed without support on MK4S with only…

Ceramic tools ( Tile spacers and trowels )

THIS IS STILL A WORK IN PROGRESS, ITS NOT FINISHED YET!!

Concrete Trowel Stamp

This STL file is designed to create a custom concrete trowel stamp, perfect for adding unique branding or decorative designs to concrete surfaces. The file includes a fully functional base trowel stamp template, allowing you to easily add…

Fliesenkelle, Zahnspachtel | Tile trowel, notched trowel

Einfache Fliesenkelle/Zahnspachtel falls man mal ein paar Fliesen verlegen möchte und seine vorhandene gerade nicht findet oder man gar keine besitzt. Abstand der Zähne 3mm, auf Anfrage kann ich auch Variationen davon hochladen.…

silicone trowel / Silikon Glätter / different sizes

silicone trowel / Silikon Glätter / different sizes → Sizes ca. 6mm | 8mm | 10mm | 12mm → 0.4 Nozzle → 0.2 mm Layer Height → 30% infill → TPU → Cleaning →water | paper | toothstick | dish soap → it's not a silver bullet, but it helps to…

Hřebínek na obklady/Notched trowel for tiling

Potřeboval jsem rychle obložit kus zdi a nebyl čas shánět všechno potřebné vybavení v obchodě. Tak jsem si hřebínek na obklady navrhl a vytiskl. Průměr i výška zubu 5 mm. Na takové to domácí žvýkání celkem v pohodě. [ENGLISH] I needed to…

Glättekelle, Zahnkelle, Zahnspachtel, Notch Trowel

Für eine kleine Fläche Fliesen wollte ich keine Zahnkelle/Glättekelle kaufen. Gedrucktes Modell war erfolgreich im Einsatz. Habe verschiedene Varianten mit unterschiedlicher Zahnung hochgeladen. ----------------------------------- I…

2 in x 3 in Notched Trowel for Tile

Square notches in 1/8" and 3/6" on the 2" sides and optionally ¼" notch on the 3" side.

Trowel Van Mount (For All Sized Trowels)

This is a mount for all sized trowels. 10% - 15% infill. countersunk holes for screws.

Hiking Trowel

I needed a new trowel for a long hike, but unfortunately my local outfitter only had expensive trowels in stock. I designed this with hiking/backpacking in mind-- the trowel is lightweight, comfortable to use digging small holes, and can…

Gardening Tool - Mini Trowel and Fork for Seedlings

Styled on the cheap tools you can get from supermarkets, but this costs about 13p to print and if you break it you just print another :o) Works fine for separating out young seedlings for potting on or planting out in the garden. I used…

Cement trowel

A simple trowel for smoothing and shaping cement.

Fugenglätter, Silicone Trowel

A simple model for smoothing silicone joints . Average print time: 17 min. No supports

Outer corner trowel, fast, cheap and sturdy

Needed a outer corner trowel for my garage isolation project. Couldn't find anything that would fit my needs, so I created this. No supports Quick print (around 2 hours) Can be easily printed in .28 layer height to reduce print time…

Backpacking Trowel Palm Protector

This cap fits over the top of a backpacking trowel to protect your palm from sharp edges. Credit for the idea goes to https://www.printables.com/model/510991-lixada-camping-shovel-hand-protector This model is original, designed to fit the…

Concrete Edging Trowel 0.25" Radius

Incorporated feedback from other designs here. Will have to glue handle to top or drill your own screws. It's a 0.25" radius. 1.8" wide, 4" long. Edger side is about 1" deep. Leading edges on both sides are 1/8" chamfer. How I Designed…

TPU Grip Cushion / Hand Protector - Naceture Ultralight Backpacking Trowel

This does what it looks like it does. Fits Naceture Trowel (#1 on Amazon) https://www.amazon.com/gp/product/B09D9RZ71H/ref=ewc_pr_img_1?smid=A31CDLOEH2EGX3&th=1 Features comfortable roll-top end and nubbin detent what for keeping it…

Splatula / Trowel

Flexible spatula for cleaning and treatment of plaster and stucco. Print on PETG with 5 perimeters, 15% infill, Gyroid recommended.

Mini plastering trowel

A mini plastering trowel can be used in modeling for applying, spreading, and smoothing materials like putty, filler, or

Square Notch Glue Spreader/Trowel

1.2mm thick. Notches are 2mm 3mm 6mm and 6x3mm. Enjoy 8mm hole for hanging.

Edge Trowel

I needed to repair some stairs but, since I don't plan on doing it ever again, I didn't want to buy an edge trowel. So I designed and printed one. It worked great.

notched trowel

A mini trowel I modeled for putting in a tile backsplash.

Drywall Inside Corner Trowel, Hole Repair, View Hole Cover

Drywall Inside Corner Trowel, Hole Repair, View Hole Cover

9mm U-Notch Trim Trowel

This is a 9mm U-notch trowel that I designed for tile trim. It is the equivalent of a 1/4 x 3/8 notch trowel and leaves about a 3/16 (4.76mm) bed of thinset. Here is the A360 downloadable file if you want to customize it to make your own…

Narrow 8mm Notched Trowel

Needed a narrow trowel for adding thin tiles along the edge of the floor. Standard notched trowel was too large to fit 8x8mm notches 72mm wide Printed in PETG

Garden Trowel Handle

The example was printed in PET-G. You can use a socket head bolt and nut to hold the metal part in place.

3D Printable Archaeology Trowel (Remixed from Photogrammetry Scan, Two-Part Print)

I was looking for an archaeological trowel to 3D print as a toy , but I could not find any printable models. While searching, I came across a detailed photogrammetry model of a real archaeology trowel , so I decided to adapt it to make it…

Double Ended Thermal and Solder Paste Spreading Trowel

Double-ended trowel used to spreading thermal or solder paste onto either a PCB. PCB Stencil or a CPU. Two separate files one with the label of our website and a second unlabeled one. Dimensions: 122mm x 24mm x 5mm

Long Square Notch Glue Spreader/Trowel

just needed the original model to be a little longer to speed up application.

1/2" Trowel for Schluter Heating Systems (Wire-Safe)

If you are installing a Schluter Ditra-Heat floor system (or any radiant heated floor), you know the anxiety of spreading thinset over those expensive heating cables. One slip with a sharp metal trowel can nick a wire and ruin the entire…

Garden Trowel

Garden Trowel

Maurer Kelle Brick Trowel

Eine Maurer Kelle für den Feuerungsbau. Noch nicht getestet. Würde ASA oder ABS zum drucken empfehlen.

Glue Trowel

you know you have no life, when on a Friday night you stay in a design a glue trowel for work LOL XD updated to v2, has thinner teeth to get into corners better Category: 3D Printing

Surveyor's trowel

This is a tool for surveyors and other people who have to dig out pits, services and similar small holes in the ground. Can also be used as an enormous ice-cream scoop. :P

135° Drywall trowel/tool for knee walls

If you are adding a 45-degree knee-wall, but still need a tool to help with mudding/taping, you can print this one. Hold it flat to fit the 135 degree angle perfectly. Hold at an angle to use the edges independently. I printed mine with…

Small Trowel (no supports)

This is a small hand trowel that prints without supports. Works well for digging small holes and is very lightweight. I printed it in PETG at 0.1mm layer height on a Prusa i3 Mk3 and it came out nicely. I did sand it a bit to make it nice…

Hand Spade / Trowel

I wanted to test my skill at making usable tools, and have created this. This design needs minimal supports, with them only needed under the handle. I used a 25% infill, and it feels nice and strong so I dont see a need to go too much…

Gardening trowel

Should be useful in planting and potting. Print instructions Print with supports for better inner surface.

Gardening trowel - cyberpunk version

Super cool and modern cyber version of the simple gardening trovel. You still didn't print one?

Corner Trowel

I printed this at 0.2mm layer height without any supports. Had to fix the corners on the printer cabinet I'm building with joint compound. This print gave me the perfect rounded corners!

Masonic Trowel

Model of a Masonic Trowel.

Notched trowel 3m adhesive scraper

a 3mm notched trowel / scraper for spreading applying adhesive

Drywall corner trowel

Rohová špachtle na sádrokarton

Epoxy Trowel

When floating epoxy coat on a table top its hard to get the perfect thickness. The epoxy will self level but to get it really good you need to have a pretty constant thickness. I found some epoxy trowels online but they were only a few…

Concrete edge trowel rounded

Just a modified version on DGA's model.

Concrete edge trowel sharp

I modified DGA's model and gave it tapered ends and a harder edge.

Concrete hand float and trowels variety pack

Printed in PETG, the float uses KREG square drive screws for mounting the handle, printed on a glass bed for a smooth finish. The trowel's are modified versions of DGA's hand trowel. I added tapers to both ends and made one with a sharper…

JOINT TROWEL-SET

Joint spatula set for silicone and acrylic. Set of square and round pullers. Works great with TPU.

Linoleum Flooring Adhesive Trowel

I am rebuilding the bathroom in my camp trailer and don’t own a trowel for spreading flooring adhesive so I designed a printable (and disposable) model. Given that it was going to be thrown away I wasn’t worried about it being rather…

Gardening Tool Set-Shovel,Rake,Trowel

This is a super garden tool set - your key to effortless gardening! With three adjustable, print-in-place digging tools, you can now cultivate and nourish your garden with ease. No supports needed, just simple printing. Enjoy your time in…

Silicone trowel / Silikonabzieher

Hello, i always have trouble to create nice silicone joints and startet to look for some handy tools. I saw some good tools in wood, but they were very expensive (4€ each size). Good we have 3D printers, so i designed some and tested…

Garden Trowel No Supports Required

A very simple garden trowel that can be printed without any support and joined without glue. Light sanding may be required on the base grip's top surface depending on how accurately it is printed. The dovetail joint does the trick to join…

Nescafe 200ml Glas Trowel and Tamper

Kelle um in dem Glas ganz unten an das Pulver zu gelangen und Tamper fuer Nespresso Caps Wiederbefüllbare Nespresso Kaffeekapsel aus Edelstahl zum Nachfüllen - Wiederverwendbare Refill-Kapsel für umweltbewusste Kaffee-Liebhaber kompatibel…

Concrete Curb Shaper/Trowel

The model is not very beautiful designed, but well, it has to be functional, not beautiful. I haven't tried it myself, its for a friend, if i know that it works, ill write it here. But until then: Printing at your own risk hahaha. If the…

Fugenglätter/ silicone trowel

Perfekt für Silikon Fugen glatt zu ziehen. Perfect for pulling silicone joints smooth.

Roblox Trowel (500 DOWNLOADS SPECIAL!!!)

Trowel Holster

The trowel holsters were designed to hold multiple trowels. Version 3 can be used with a belt but also has a hole that can be used with a carabiner instead. Version 4 only has a carabiner loop. I used TPU, but due to the height of the…

Notched trowel || Zahnspachtel

175mm notched trowel for large format tiles, with hook 8*8mm spacing 3-4 Top / Bottom Layers 3-4 Perimeters

Trowel Box

It is 2 pieces that should fit on a 3d printer with a print bed at least 8"x8". You will need to split the file inside of your slicer. The blade attaches to the base using 3 M6 screws. The ones I used were 16mm long. There are hexagonal…

Cat Litter Scoop Trowel Holder v.3

Review, added bag holder Category: Pets

Cat Litter Scoop Trowel Holder v.2

I have adapted the idea of SIMBAKATZE to my needs. I had to be able to use double-sided tape to attach it. Thanks Revision 2 Improvement: Better fit between body and wall mount Better cleaning with rounded inside corners Category: Other

Small trowel for plaster lists

I have created a small trowel designed to ensure a precise distance between the bottom of the tile and the surface of the plaster (eg https://www.pinterest.it/pin/21532904457891450/ ). This tool ensures a uniform and leveled plaster…

mini trowel floats

mini tools for making mini parks for fingerboarding

Multi-Notch Resin Spreader / Trowel

A simple 100mm (4"), flat, flexible resin spreader with one flat edge and three notched edges with notch sizes approximately 3.3mm (1/8″) 5mm (3/16″), 6.7mm (1/4″). It's a lot like the similar looking spreaders that you can buy for a few…

Top Coat trowel tool for Epoxy River Table

This is a notched trowel for the final hard coat of an epoxy table. Made with 1/8" x 1/8" grooves for a smooth and level finish coat. I couldn't find one out in town made of a softer material (don't want a metal one that might leave…

Number 2 Ounce Trowel

In order to protect our wilderness, human waste should be deposited in catholes dug 6-8 inches deep at least 200 feet from water, camp, and trails. This is difficult to do with sticks or hands, so I recommend this trowel. Due to it's…

Sand Trowel

I made this trowel for building sandcastles on the beach. The STL is for my hand size, reduce the scale for children or people with smaller hands. I printed 75% scale for my 7 year old son. I paused the print and changed filaments to get…

Dirt trowel

A trowel to make levelling the soil in your microgreen trays. The trowel has two dowels the fit into holes located at the bottom. The dowels in the file can be sized to the height you require by simply changing the z height in the slicer.…

Camping Trowel - Short Handle

A small camping trowel with a short handle for backpacking

Camp Trowel & Scooper

Ultralight-ish backpacking/camping trowel. Weighs in at 70 grams of material. This is considered V1, will put it through its paces and see where i can shave off some weight, while keeping it robust enough to dig catholes. 3MF file…

Ultralight Camping Trowel and Pick

I designed this with a minimalist vision in mind. The holes reduce weight slightly and allow for clipping or cord usage as you like. The asymmetrical design leaves one side smoother for comfort, while the other is hooked for light-duty…

Survival Trowel

A very sharp digging implement.

Backpacking Trowel

Small lightweight backpacking trowel with teeth on one side and a slot for a clip.

Cap for Vargo Dig Dig Trowel

This is a cap specifically designed for the Vargo Dig Dig Titanium trowel. This trowel (as is the case with most titanium backpacking trowels) can be a bit rough on your palms, especially when digging hard or rocky ground. This cap slips…

Trowel

No supports need If you use ABS it works well