1 / 1
3D Printable Archaeology Trowel (Remixed from Photogrammetry Scan, Two-Part Print) — image 1

3D Printable Archaeology Trowel (Remixed from Photogrammetry Scan, Two-Part Print)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Two part printable archaeology trowel remixed from a photogrammetry scan of a real tool.

Rating
0 / 5
Likes
3
Downloads
53
Makes
0
Views
188
Reviews
0

Updated at source:

Model information

Category
Outdoor Toys
License
Creative Commons — Attribution — Noncommercial — Share Alike

I was looking for an archaeological trowel to 3D print as a toy, but I could not find any printable models. While searching, I came across a detailed photogrammetry model of a real archaeology trowel, so I decided to adapt it to make it easier to print.

This is therefore a remixed model prepared specifically for 3D printing.

The model is split into two separate STL files so the blade and handle can be printed in different colours and with different strength settings:

  • Blade

  • Handle

This also allows the blade to be printed solid while keeping the handle lighter and faster to print.

Print settings I used

Handle

  • 30 percent infill

Blade

  • 100 percent infill to make it stronger

Assembly

The handle socket is designed for a tight fit. To make assembly easier, I briefly softened the handle by holding it in the steam from a kettle for a few seconds, then inserted the blade.

Once cooled, the handle tightens around the blade and holds it securely.

Attribution

This model is based on the original photogrammetry scan published on Sketchfab under a Creative Commons Attribution licence:

https://sketchfab.com/3d-models/archaeology-trowel-46c6a91c78d1451bb3f9081543c31144

The geometry has been modified to make it more suitable for FDM printing.

Tags