3D Printable Archaeology Trowel (Remixed from Photogrammetry Scan, Two-Part Print)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two part printable archaeology trowel remixed from a photogrammetry scan of a real tool.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was looking for an archaeological trowel to 3D print as a toy, but I could not find any printable models. While searching, I came across a detailed photogrammetry model of a real archaeology trowel, so I decided to adapt it to make it easier to print.
This is therefore a remixed model prepared specifically for 3D printing.
The model is split into two separate STL files so the blade and handle can be printed in different colours and with different strength settings:
Blade
Handle
This also allows the blade to be printed solid while keeping the handle lighter and faster to print.
Print settings I used
Handle
30 percent infill
Blade
100 percent infill to make it stronger
Assembly
The handle socket is designed for a tight fit. To make assembly easier, I briefly softened the handle by holding it in the steam from a kettle for a few seconds, then inserted the blade.
Once cooled, the handle tightens around the blade and holds it securely.
Attribution
This model is based on the original photogrammetry scan published on Sketchfab under a Creative Commons Attribution licence:
https://sketchfab.com/3d-models/archaeology-trowel-46c6a91c78d1451bb3f9081543c31144
The geometry has been modified to make it more suitable for FDM printing.
