Assembly Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organizer tray primarily designed for pins and other small parts to be used with assembly work. Stackable and hangable.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 76
- Wydruki
- 2
- Wyświetlenia
- 421
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
NOTE V2 Model:
https://www.printables.com/model/583031-assembly-tray-v2
I work in electrical assembly and as we need more of these I opted to print some. There are two variants for compartment counts to suit different needs on our production floor. Both are stackable and hangable.
177 x 80 x 20.25mm
Print settings shouldn't be too picky but here are my settings for a decent strength in hopes it holds up long term:
- Overture Nylon
- 0.25mm Layer height
- 0.4mm extrusion width
- 3 perimeters, 4 top layers, 3 bottom layers
- 20% grid infill
- Avoid crossing perimeters
- Seams manually drawn at corners.
Prints are coming out a bit stringy but strong. I am new to nylon but from my understanding this is the trade off. Other materials should be cleaner and without need for the last two settings.
Note: You may run into issues stacking if you have too much elephant foot. Though I did add tolerance with this in mind, I have still run into issues with squishing first layer too much.
Should also mention though I intended to bulk print these on my V2.4 they will fit on a Mini!