Assembly Tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Organizer tray primarily designed for pins and other small parts to be used with assembly work. Stackable and hangable.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 76
- Makes
- 2
- Views
- 421
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
NOTE V2 Model:
https://www.printables.com/model/583031-assembly-tray-v2
I work in electrical assembly and as we need more of these I opted to print some. There are two variants for compartment counts to suit different needs on our production floor. Both are stackable and hangable.
177 x 80 x 20.25mm
Print settings shouldn't be too picky but here are my settings for a decent strength in hopes it holds up long term:
- Overture Nylon
- 0.25mm Layer height
- 0.4mm extrusion width
- 3 perimeters, 4 top layers, 3 bottom layers
- 20% grid infill
- Avoid crossing perimeters
- Seams manually drawn at corners.
Prints are coming out a bit stringy but strong. I am new to nylon but from my understanding this is the trade off. Other materials should be cleaner and without need for the last two settings.
Note: You may run into issues stacking if you have too much elephant foot. Though I did add tolerance with this in mind, I have still run into issues with squishing first layer too much.
Should also mention though I intended to bulk print these on my V2.4 they will fit on a Mini!