1 / 3
Adapter for Bicycle Bell Children's Tricycle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kid needed a new tricycle bell. Tube diameter 16mm, bell inner 22mm. What now?
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Grandkid needed a new tricycle bell. Tube diameter 16mm, bell inner 22mm.
- Step: Measure OD Ø16 and ID Ø22mm.
- Step: Start TinkerCad, draw a Ø22mmx18 cylinder, another two Ø24x3mm cylinders, arrange the two at to and at end, center align all, group and cut a Ø16mm hole. Make a diagonal cut through one side for assembly reasons, make a groove cut on opposite side for flexibility when opening the diagonal cut section.
- Step: Print in TPU.
- Step: Mount the adapter on the steering rod.
- Step: Mount the (new) bell over the adapter and tighten thoroughly.
Printed with darkblue TPU on my MK3s+ with bypassing my MMU2s.
Note: SAFETY FIRST! IT IS A GOOD REASON TO EQUIP A TRICYCLE WITH A BELL!
Grandkid happy - Grandpa happy!
Explore my other Printables: https://www.printables.com/de/@Tritschi