Kalih hot-swap socket desoldering rig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jig to simplify desoldering Kalih hot-swappable sockets for cherry MX keys
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 529
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I created this model to simplify de-soldering Kalih hot-swappable sockets for MX-compatible keyboard switches. Idea being to place it under the PCB as if it was a switch, and then let gravity gently push the socket up from the PCB once you heat the pads and alternate between left and right.
Designed to fit the keyboard I was desoldering from. Has a cut out to fit a led, which can additionally help to align the jig. I assume it will generalize quite nicely except possibly the led - but do give it a try!
Outer dimensions: 14x14mm.
OpenSCAD file provided in case it doesn't fit your keyboard.
I've printed it in PLA which works but expect to run through a few copies if you heat so long that the plastic becomes deformed. No special settings required.
Reference for socket pin measurements: https://www.kailhswitch.com/Content/upload/2019306614/201911041106306722247.jpg
(In hindsight I should just have bought new sockets, but if you also get the idea of desoldering then this should aid.)