Double-sided tape bracket for Hikvision Dome IP camera
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mount made for Hikvision DS-2CD2347G2-LSU/SL IP camera. It let you mount camera using double-sided tape.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 122
- Wydruki
- 0
- Wyświetlenia
- 598
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This mount made for Hikvision DS-2CD2347G2-LSU/SL IP camera. But will work for other models with same dimensions.
I wanted to connect the camera to tiles on the wall, but didn't want to make holes in the wall.
I printed the model using PETG filament and used 5 perimeters with 5% infill, layer height 0.28mm, support style: Snug.
The original screws provided with hikvision camera works for the model.
Before connecting the camera with tape I degreased the wall with ethanol alcohol and applied "3M 94 Primer" on the wall, then connected "3M VHB" tape to the mount and pushed it against the wall.
To unstick the mount from the wall later, use alcohol (isopropyl or ethanol). Spray it on top of the mount to let it go under the 3m tape, it will reduce adhesion and you can disconnect the mount from the wall.