1 / 3
Qidi X-Smart 3 and X-Plus-3 Magnetic front cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement cover for X-Smart 3 and X-Plus 3 models. Standard, Volcano and Q1-Pro Hot ends
- Ocena
- 3,667 / 5
- Polubienia
- 31
- Pobrania
- 258
- Wydruki
- 3
- Wyświetlenia
- 1199
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 3) (Komentarze: 9)Remiksy (0)Kolekcje (51)Powiązane
Replacement cover for X-Smart 3 and X-Plus 3 models. Standard, Volcano and Q1-Pro Hot ends.
Designed to use standard size ducts. Volcano front is 2mm lower and Q1-Pro is 3mm lower.
Designed for normal 5015 blowers. Qidi's funny one will be slightly out on the front opening.
Needs 12 x 6x3mm neodymium magnets.
You can use 6x2mm magnets on top and a 6x1mm washers wired into fan and toolhead to make the board fully removable without tools. Magnets make electrical connection.
