1 / 3
Qidi X-Smart 3 and X-Plus-3 Magnetic front cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement cover for X-Smart 3 and X-Plus 3 models. Standard, Volcano and Q1-Pro Hot ends
- Rating
- 3.667 / 5
- Likes
- 31
- Downloads
- 258
- Makes
- 3
- Views
- 1,201
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Replacement cover for X-Smart 3 and X-Plus 3 models. Standard, Volcano and Q1-Pro Hot ends.
Designed to use standard size ducts. Volcano front is 2mm lower and Q1-Pro is 3mm lower.
Designed for normal 5015 blowers. Qidi's funny one will be slightly out on the front opening.
Needs 12 x 6x3mm neodymium magnets.
You can use 6x2mm magnets on top and a 6x1mm washers wired into fan and toolhead to make the board fully removable without tools. Magnets make electrical connection.
