Toilet Flush Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My toilet flush arm broke and instead of trying to buy one - I 3D printed one
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 79
- Wydruki
- 2
- Wyświetlenia
- 385
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My toilet flush arm broke and instead of trying to buy one I decided to design in OnShape and 3D printed one. Sorry, I don't know the manufacture but the ones I found on line did not look like my flush arm. Some wanted to replace the entire assembly, some had a triangular hole.
Mine has a square mount hole that is slightly tapered, The old arm had stiffening sides that extruded past the main part. I added the stiffening sides but only up one side. This allowed the print to be flat on the build table.
The arm is 219.5 mm (8.6 in) long.
Build Settings:
0.2mm layer height
4 walls
Support: I don't think it was needed but I printed in PLA and used PETG as regular support interface. No brim.
I saved the uploaded the files in STL, STEP and 3MF
I hope someone finds this useful.