Toilet Flush Arm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My toilet flush arm broke and instead of trying to buy one - I 3D printed one
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 79
- Makes
- 2
- Views
- 385
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My toilet flush arm broke and instead of trying to buy one I decided to design in OnShape and 3D printed one. Sorry, I don't know the manufacture but the ones I found on line did not look like my flush arm. Some wanted to replace the entire assembly, some had a triangular hole.
Mine has a square mount hole that is slightly tapered, The old arm had stiffening sides that extruded past the main part. I added the stiffening sides but only up one side. This allowed the print to be flat on the build table.
The arm is 219.5 mm (8.6 in) long.
Build Settings:
0.2mm layer height
4 walls
Support: I don't think it was needed but I printed in PLA and used PETG as regular support interface. No brim.
I saved the uploaded the files in STL, STEP and 3MF
I hope someone finds this useful.